1 1 300000 1 0 0 1 0.442166957942813 0 0 0.0706011496062992 0.0706011496062992 0.79 1 1 0.794328234724281 0 7090.39058522946 0 1000 20 0 500 20 0 309.153392066329 0 6055.04883138099 0 1000 20 0 500 20 0 306.065656818835 0 50 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 RACE (Recursive Ambiophonic Crosstalk Eliminator) - verF - RM07 1. In Edit/Settings, select SoundIn source, SoundOut destination. 2. Set recursive delay in Delay module to 0.07milliseconds for tight focus, 0.08ms for default HRTF, or 0.09ms for larger head. 3. To set recursive attenuation (from max stage width -2.5dB to min coloration -6dB, default -3.5dB), do both the following: b) Set Sidechain Gain to desired recursive attenuation, in dB; c) Set Delay feedback in % to equivalent dB above as follows: -2.5dB=75%, -3dB=71%, -3.5dB=67%, -4.5dB=60%, -6dB=50%; 4. Press speaker icon button to enable RACE DSP; 5. Play source (note SoundIn & SoundOut meters). Voila! Note: Keep MasterAtten -4dB, BandPassFilter -6dB 300Hz & -6dB 7kHz (other gains 0dB), nullEQ 0dB all gains, Delay wet/dry=100%. 6. For real-time MIDI control (optional), enable MIDI (button next to speaker icon). For each function below, right-click 11 parameters at right (including 4 ganged pairs), selecting "Quick-map" and twiddling desired knob to assign to seven (7) controllers. (Mapping ranges are preset.) - MasterAtten; Sidechain Gain & Delay Feedback (ganged); RACE off_ON (in1 to out1 & in2 to out2); Delay times L & R; BP Filter Low cutoff frequency; Low Gain & Hi Gain; Hi cutoff freq.